AREAS OF UTILIZATION
• It is used in vertical and horizontal applications on the exterior of buildings.
• Application surfaces are concrete, plaster, screed, wood, PVC, and metal surfaces.
• Application areas are flat and inclined terrace roofs, pools, water tanks.
ADVANTAGES OF THE PRODUCT
• It is ready to use.
• It is elastic.
• It is resistant to UV rays.
• It provides easy waterproofing on cracks.
• It is applied with a brush or roller.
• It is resistant to water accumulations.
• Processing time is long.
• It provides high adherence.
• It can be painted.
• It is resistant to temperature differences due to its elastic structure.
PREPARATION OF THE SURFACE
• The surface must be cleared of all kinds of material wastes that prevent adhesion; It should be clean, smooth and solid.
Before WERIMIT STROMIT W-STOP (Fibered Waterproofing Material) application on uneven surfaces, such surface should be repaired with WERIMIT WETECH-REPAIR at least 24 hours before the application.
• The flow of water towards the drains should be provided, and it should be ensured that there is no ponding.
PREPARATION OF THE SURFACE
• The surface must be cleared of all kinds of material wastes that prevent adhesion; It should be clean, smooth and solid.
• Before WERIMIT STROMIT W-STOP (Fibered Waterproofing Material) application on uneven surfaces, such surface should be repaired with WERIMIT WETECH-REPAIR at least 24 hours before the application.
• The flow of water towards the drains should be provided, and it should be ensured that there is no ponding
STANDARD NO
• TS EN 14891/24.04.2017.
TECHNICAL SPECIFICATIONS
• Application temperature: +5 °C / +30 °C
• Initial Tensile Adhesive Strength: ≥ 0.5 N/mm²
• Tensile Adhesive Strength after contact with water: ≥ 0.5 N/mm²
• Tensile Adhesive strength after freeze-thaw cycle: ≥ 0.5 N/mm²
• Tensile Adhesive Strength after thermal aging: ≥ 0.5 N/mm²
• Tensile Adhesive Strength after contact with limewater: ≥ 0.5 N/mm²
• Crack bridging ability under standard conditions: ≥ 0.75 mm.
• Application Thickness: 1-1.5 mm (in 3 layers)
• Waiting time between coats: 4 hours
• Complete drying: 48 hours
• Duration of the mechanical strength gain: 7 days
• Capillary water absorption and water vapor permeability: < 0.1 kg/m².h 0.5
• Consumption: 1.7 kg/m²/mm
• The above data was obtained based on the results of laboratory tests, and values may
vary due to differences in the construction site environment.
APPLICATION
• WERIMIT STROMIT W-STOP should be applied without diluting, with a roller or brush, or as at least 2 coats on the entire surface.
• According to the condition of the surface, WERIMIT STROMIT W-STOP should be diluted with water in a one-to-one ratio, one coat of primer should be applied, and two coats should be applied undiluted.
• Micro cracks, joints, corners, and edges should be supported with polyester felt after the first coat application.
• The application of polyester felt on terrace roofs should be applied to the entire surface after the first coat application.
• After the first coat has dried, the second coat should be applied perpendicular to the first.
• Shelf life is 12 months when stored in its unopened original package, free of moisture, dry and not exposed to direct sunlight.
COLOR
• White