AREAS OF UTILIZATION
• It is used on all interior and exterior surfaces before plastering, on smooth surfaces
such as exposed concrete, betopan, ceiling.
ADVANTAGES OF THE PRODUCT
• Ready to use
It increases the adhesion of the plaster to be applied to the surface.
• In plaster application, since the water absorption of the surface is low after the use
of primer, it enables the plaster to be processed more easily.
PREPARATION OF THE SURFACE
• Application surfaces must be clean, robust, and free from dust.
• Oil, dirt, or anti-adhesion materials (dust, etc.) should be cleaned from the
surface, mortar cement residues, etc. should be scrapped.
• If necessary, the application surface should be cleaned with water.
• Cracks and gaps on the surface should be repaired at least 1 day before application
with WERIMIT WETECH-REPAIR.
TECHNICAL SPECIFICATIONS
• Density: 1550 g/L
• Drying Time: 60-90 min
• Time Required for Plaster Application: Minimum 24 hours.
• Consumption: 0,2 5-0,35 kg/m²
(Depending on surface)
• The above data are obtained on the basis of the results of laboratory experiments, the
• Ready to use. values may vary due to the difference in the construction site environment.
APPLICATION
• WERIMIT WEPRIME-GROSS (Gross Concrete Primer) is ready for use.
• Mix thoroughly with a low-speed mixer (approximately 300 rpm) for 3 minutes until a
• homogeneous mixture is obtained.
• It is applied evenly to the surface with the help of a roller and left to dry.
• Drying time may vary depending on weather conditions and ground conditions.
• After drying, cement / gypsum-based plaster application is started.
• When stored in its original unopened packaging in a way that is moisture-free, dry, and
not exposed to direct sunlight, the shelf life is 12 months.
COLOR
• Pink