• The above data was obtained based on the results of laboratory tests, and values may
vary due to differences in the construction site environment.
APPLICATION
• 2/3 of 25kg WERIMIT WETECH-SURFACE (Surface Hardener) is spread homogeneously on
the surface, and it is expected to be moistened evenly on all sides (color change should
be observed)
• The material is incorporated into the concrete by finishing it with a tray trowel.
• The remaining 1/3 of the material is spread homogeneously on the floor in the same
way and it is expected that all sides of it will be moistened (change color) evenly.
• Then, it is, incorporated to the surface with a low-speed tray trowel and integrated into
the WERIMIT WETECH-SURFACE concrete.
• After providing the surface hardness that can be walked on, the material is finished with
a high-speed machine to obtain a quality surface.
• After the surface hardener application is finished, the curing material, WERIMIT
WEPRIME- ACRYLIC CURE should be applied to the surface in order to prevent shrinkage
cracks and to ensure dustproofing.
• Joint cutting should be done as soon as possible. If it is carried out late, the cutting
process will be difficult as the concrete will reach its strength, and unwanted concrete
cracks may occur on the surface.
• In order to prevent possible color change on the applied surface, it is necessary to
sprinkle WERIMIT WETECH-SURFACE as much as possible.
• Shelf life is 12 months when stored in its unopened original package in a way that is not
exposed to moisture, dry and direct sunlight, provided that it is placed in a maximum of